WhelenNDealin
Member
I recently acquired a Siracom II. I'll post which model as an edit. It's the second Siracom II in my collection, albeit a different model. It's in *excellent* condition and everything works as it should. Relays are fine and the oscillator is good to go. The thing is that it'll only activate a tone manually. I have to push the manual button on wail, yelp and hi-lo. It works essentially as a manual yelp, hi-lo and wail.
I've looked through the manual and nothing's said outright about a setting. I find FS manuals to be murky at times, be it their odd wording or details provided. I'm guessing that it's a dip switch or jumper behind this. The manual mentions dip switches for setting up which outputs are activated by the control knob (e.g. Position 2 activating position 1 and 2 outputs or only the position 2 output, etc). That said, I'll open it up and take a look. I'll look for anything out of the ordinary. It's still a neat siren and I'm very happy to have two different NOS condition Siracom IIs.
As always, any advice is greatly appreciated!
I've looked through the manual and nothing's said outright about a setting. I find FS manuals to be murky at times, be it their odd wording or details provided. I'm guessing that it's a dip switch or jumper behind this. The manual mentions dip switches for setting up which outputs are activated by the control knob (e.g. Position 2 activating position 1 and 2 outputs or only the position 2 output, etc). That said, I'll open it up and take a look. I'll look for anything out of the ordinary. It's still a neat siren and I'm very happy to have two different NOS condition Siracom IIs.
As always, any advice is greatly appreciated!