Swapping modules on Galls Dual Talons

[Nine29]

I have two Galls R/B Dual Talons (TN series). Is it possible to swap the modules so they're R/R and B/B? If so, how easy/hard is it to do? I did search and read the Dual Avengers are a no go (unless you're an EE, which I'm not!).


They're both still under warranty, but I'm sure this would void it if I attempt the swap. Appreciate any tips...

 

[Zapp Brannigan]

http://elightbars.org/forums/f13/quick-whelen-talon-question-20433/

 

[Nine29]

http://elightbars.org/forums/f13/quick-whelen-talon-question-20433/

Thanks for the link. So I assume the Galls Talons are constructed the same as the Whelens? Is swapping the modules a plug-n-play procedure? From reading the link it sounds like not all Talons are constructed the same.

 

[Zapp Brannigan]

Thanks for the link. So I assume the Galls Talons are constructed the same as the Whelens? Is swapping the modules a plug-n-play procedure? From reading the link it sounds like not all Talons are constructed the same.

The TN Series are the exact same thing as Whelen's former Talon Series. They are manufactured by Whelen, re-branded Galls TN Series, which they even stopped manufacturing that series a couple months back, as the Whelen Avenger Series replaced it.


Whelen originally manufactured the Talon in a Ballast version, and later changed to a Passive model, and never went back to Ballast. The TN Series from Galls were never made in Ballast version.

 

[Zapp Brannigan]

Here is another link I hope helps...


http://elightbars.org/forums/f13/need-some-information-some-talons-15688/


In that thread, I linked to another thread...


Pros/Cons between ballast and passive whelen dual talons

 

[Nine29]

Good info...thanks.