I have a question about programing whelen duo heads. The front of my car is going to be a dual avenger II duo red/white and 4 Ion duos red/white. Can you have a flash pattern for each individual color and a third pattern for both colors combined? What I would like to do is have red and white flashing together, red only for night time, and then finally steady white for scene lighting. Also, if I set the white to steady burn, will it always override the red, even if I have both colors on at the same time. Just for clarification, the setup will currently be run using an hhs2200
Whelen duo heads programing question
- Thread starter emt111
- Start date
Without the HHS2200, no. With the HHS2200, i'm pretty sure you can't, but there is a small possibility i'm wrong. You're going to need something like carbide or a cheaper option for only like $175 is a smart logic flasher.
SafetyLighting
Member
White will always override the color. To do what you want though, you'd have to use an external flasher and relays, or a programmable flasher like the SLFlash.
That's what I figured, thanks. Probably will eventually upgrade my set up to include a carbide, but for right now I'm just going with what my agency is giving me