JohnMarcson
Administrator
This is a 23" Whelen Freedom min lightbar. It is fully populated with 8 LED heads. It is wired so front, side, center and rear are all on separate wires. The wiring harness is short but I will include a longer one that can be added. The mounting feet are permanent style metal (for mounting on a headache rack), but I can swap them out for standard freedom/edge style feet if the buyer requests.
The front has two corner modules (fully populated) and a center clear 400 series. The sides each have a Whelen 400 series LED in place of the alley lights. The rear has 3 directional 400 series LEDs across the back of the bar. Wire one activates the corners. Wire two activates the center LED. Wire 3 activates the side LEDS. Wire 4 activates the rear.
All components are Whelen, there are no splices etc inside. This is a factory setup with added side and rear LEDs using the OEM Whelen plugs and control board.
Looking for $350, e-mail ram4elightbars@gmail.com
The front has two corner modules (fully populated) and a center clear 400 series. The sides each have a Whelen 400 series LED in place of the alley lights. The rear has 3 directional 400 series LEDs across the back of the bar. Wire one activates the corners. Wire two activates the center LED. Wire 3 activates the side LEDS. Wire 4 activates the rear.
All components are Whelen, there are no splices etc inside. This is a factory setup with added side and rear LEDs using the OEM Whelen plugs and control board.
Looking for $350, e-mail ram4elightbars@gmail.com
Attachments
-
on2.jpg104.2 KB · Views: 40
-
on1.jpg516.7 KB · Views: 37
-
IMG_20210224_082049898 (1).jpg60.5 KB · Views: 28
-
IMG_20210224_082317205.jpg52.8 KB · Views: 26
-
IMG_20210224_082302838.jpg67.3 KB · Views: 25
-
IMG_20210224_082222038 (1).jpg70.7 KB · Views: 24
-
IMG_20210224_082439084.jpg71.6 KB · Views: 23
-
IMG_20210224_082236447.jpg54.8 KB · Views: 21
-
IMG_20210224_082244571.jpg57.4 KB · Views: 36