Whelen inner edge red/blue for Crown Vic (front and rear)

[paff2]

 Front and rear inner edge removed from a Crown Vic. Both are red and blue combination. Front bar has takedowns and the rear bar has a built in TA. Both bars have the wires cut but everything works as it should. There are brackets on the bars that were used to mount to the headliner for the front and rear bar.

I have these listed as one because they are for the same vehicle but I will sell them separately if requested.

Looking for 575.00 for the pair or 300.00 apc. Shipping probably around 10.00 apc only in the US or local pickup in Lancaster PA.

??? Possible trade for an all RED Feniex Pegasus or TIR style Whelen inner edge???

 

[RideRed1990]

Might be interested in the front, do you know how hard it is to replace the heads? Also is it possible to convert the halogen TD to LED?

 

[paff2]

Might be interested in the front, do you know how hard it is to replace the heads? Also is it possible to convert the halogen TD to LED?

 I will need to look at it. It appears that they are pretty simple to get to. Also I am sure you could replace the halogen with a LED. Anything can be done if you have the know how and patience to do it.

 

[Phoenix_Rising]

the heads should be simple to snap in and out; however there in lay the problem; you need that style head, any standard lin/tir head wont work. you can however, sends the heads to Wilsonbr, he can change the heads to any color youd wish.


As for the takedowns, thats a simple swap (although it may take a slight mod) to switch from the halo to an LR11

 

[Phoenix_Rising]

Top 2 pics show an inner edge head. Notice the clips on the side. The bottom picture shows a standard liberty head. Theres tabs instead of clips, and theyre on the top/bottom of the head, where the inner edge head has the clips on the sides.


Hope this helps, GLWYS

 

[RideRed1990]

Ok I got it, basically gotta find the heads with the side clips, cause going to be switching em all out to a combo of yellow/green/clear, still working on getting some funds together just gotta try and get a few little things sold here locally and I should have the cash to get it ( as long as my car does not break more stuff)

 

[Phoenix_Rising]

for the inner edge, especially for anything green; I would highly recomment wilsonbr90's services. he is reasonably priced. link to his thread (which includes some pricing) is below

 

[memorex]

Pn sent on inner edges.

 

[paff2]

 Sold to Memorex