ronaconda
Member
Played around with a Liberty LFL last weekend (model SW8BBRR) with the Universal WeCan Controller and got nothing out of the lightbar. Confirmed that I had power where there should have been power and ground where there needed to be ground; grey to grey, green to green, and shield to black/white. Also had to +12v to the function that I wanted to control but got absolutely nothing. According to the controller install instructions, there shouldn't have been any flash patterns that needed to be programmed. What could I have possibly done wrong? I have included pics of the lightbar sticker and the WeCan Controller. It was my understanding that the controller should work that particular lightbar. Was I misunderstood? Any advice.
Some background...this lightbar will be part of my collection in my garage only and is not being used for a particular build. The lightbar I bought from a guy that purchased a decommissioned FIPU that still had the bar installed sans controller. The controller I purchased off of ebay; came in its Whelen packaging with the 2 wire harnesses for the controller.
Thanks in advance...MERRY CHRISTMAS!!!
Some background...this lightbar will be part of my collection in my garage only and is not being used for a particular build. The lightbar I bought from a guy that purchased a decommissioned FIPU that still had the bar installed sans controller. The controller I purchased off of ebay; came in its Whelen packaging with the 2 wire harnesses for the controller.
Thanks in advance...MERRY CHRISTMAS!!!