Stan,
The Aerodynic almost universally had the bulkhead mirrors on any bars with the A or alley option. My question was did the Gen 1 bars do so, looking at the parts diagrams I have it...
I have managed to strip everything down to the base components. Next up is a good clean and degreasing, then I need to debubba some wiring as the bar seems to have some dead shorts.
I...
That's where this one is gonna end up. I have most of the correct parts for this revision, but not all. Gearbox will be of a newer style and the motor.. obviously. I am replacing with a...
and the beat goes on.. replaced the belt and now I can't find my OG speaker Grille.. it never ends.
For those looking for a belt...
240XL025 - Timing Belt, XL, 0.25 x 24in PL, T120...
I have managed to isolate and correct the dead shorts, now I am cleaning parts as I reassemble. Its taking longer then normal as I have had to re-tap some of the holes in the frame for one...
Spent most of the day tearing through boxes on my hunt, cannibalized some other parts Aero's for little things here and there.. I don't think I am going to repaint the bottom of this frame...
And I jinxed it.. I had to replace the outer rotator on the passenger side as the gear was worn down too much. I forgot that there is some play on these bars when you loosen the rotators and...
Vintage amber Federal Signal Twinsonic Lightbar. It is badged as a Model 12, however it has the X mirrors (12X). It has been dismantled, cleaned, chains oiled and domes polished Domes do...
Thought this was interesting picked up a NOS grout code 3 XL four rotator and the location of the mirrors in the rotators are very odd to me, but I couldn’t pass it up because like I said it’s NOS...
Vintage amber Federal Signal Twinsonic Lightbar. It is badged as a Model 12, however it has the X mirrors (12X). It has been dismantled, cleaned, chains oiled and domes polished Domes do...
I've come across 10 rotator model 25s with the upgrade of 796 lamps, I have not personally run into a 25H yet and I can imagine what a hog this bar would be with 10 H1 lamps, and not to mention...
Today was complete disassembly of the bar. It looks like some sprayed cosmoline on all the reflectors and internals before putting this in storage. Luckily, the parts washer solvent was able to...
And I jinxed it.. I had to replace the outer rotator on the passenger side as the gear was worn down too much. I forgot that there is some play on these bars when you loosen the rotators and...
Today was complete disassembly of the bar. It looks like some sprayed cosmoline on all the reflectors and internals before putting this in storage. Luckily, the parts washer solvent was able to...