I am looking for either a bracket to mount a LINZ6 module in the alley position of a liberty one bar, or the CHP brackets which allow you to affix both a LINZ6/LR-11 into that same location.
I...
403-512MHz
Model: AAH56RDN9KA1AN
1000 Channels
Firmware: R02.09.00.0001
Bluetooth
Digital/Analog
Connect Plus Trunking
Radio is used with signs of use but nothing affects performance. Last...
I have never owned a SmartSiren. I believe you have the wherewithall to figure this out.
If I were in your shoes, I would source an amplifier and work through the process of elimination to...
I understand the connection from the control head to be made using a four-wire modular telephone cord with RJ11 connectors. Am I correct in my presumption that the four conductors are for power...
You're right about the rectifier! I appreciate the correction and the additional detail.
I am happy we can both agree that an inverter does the opposite of what's needed in this instance.
One thing worth noting before you go spend money on a power supply. Strobes and certain LED lights can act wonky using a switching power supply. I would test first with a powerpack (fused)...
Here for sale is a Whelen LFL Patriot, model number LL288000. The bar has strobe corners, 4 LEDs in the rear, 2 LEDs in the front, 2 strobes in the rear, 2 strobes in the front, 2 halogen take...
Picked up this ex-FHP Whelen Edge LFL (what became the Patriot) in of all places West Virginia. I'm not in love with the position 3 pattern but still beats the purple mush that is the FHP LEDX...
Are you still interested in a Red/Blue Excalibur. I found through a friend of mine a set of old Red & Blue outer lenses I will clean them up some if you want?
I see that you haven't received any responses, I not surprised either. Usually these can open up a can of worms and liability. The one you are asking for GTT 795H is the inferred version. If...
Picked up another Lectric Lites bar for the collection. What caught my eye about this one was that this is the first XLR Ranger that I have seen that does not have a center speaker and has amber...
Actually a rectifier takes AC as its input and produces DC as its output. The archived thread I mentioned referred to it as a "Regulated 12v inverter/supply." But shues is correct, you need a...
These are very similar to Motorola XPR6550 series radios.
450-512MHz(Codeplug modified to go down to 420MHz for ham)
Model: VXD-720-G7B-4
512 Channels
Firmware: R01.12.17
4 watt
Wide and...
A power supply takes AC as its input and produces DC as its output. You need a power supply.
An inverter takes DC as its input and produces AC as its output. You do not need an inverter.
You will need an inverter to convert 120VAC to 12VDC. There is an Elightbars thread on this topic:
https://elightbars.org/forums/threads/running-12v-dc-equipment-on-120v-ac-indoors.7483/