Appreciate that. I think I will set up stuff so I can test this; may play a part in my next build. Do you think incandescent use only, or strobe as well?Looks like flasher to me. Control input would be the 4 position connector. Then I put would be the two 3 position.
But I am no expert, and I don’t have any documentation to confirm.
Thanks much for that diagram! Mine is marked as an SL, but this diagram will be VERY helpful.Did some digging. Had a random thought as to where to find the document. And found a similar era edge bar.
This is for the 9000-AK. Which is similar to the 9000-SL.
In this it shows two flashers. One at 200 flashes per minute and one at 400 flashes per minute. One flasher does front outer halogen flashers. The other flasher does front and rear inner flashers.
But it will at least tell you what each pin does so you can wire it up appropriately. It on the last page.
PM sentThat's a halogen flasher, I always have to look at the wiring when I use one. Ranger Services probably knows them by heart.