andrewsim
Member
The Carbide box is capable of outputting 200w. If you connect two speakers to the speaker output wires on the Carbide box it will be 200w (1 is only 100w). These 2 speakers will always do the same thing.
If you add an external WeCan amplifier you connect a different speaker to that module separately, and it outputs 100w.
When you select on the hardware page that you have the siren expansion module, you are given the option to select 2 separate siren tones at the same time when configuring buttons/slide switches. 1 tone for the main 100w/200w Carbide box speaker output and 1 tone for the 100w WeCan amplifier speaker output. Hypothetically you could run 3 speakers outputting 300w in this setup.
If you add an external WeCan amplifier you connect a different speaker to that module separately, and it outputs 100w.
When you select on the hardware page that you have the siren expansion module, you are given the option to select 2 separate siren tones at the same time when configuring buttons/slide switches. 1 tone for the main 100w/200w Carbide box speaker output and 1 tone for the 100w WeCan amplifier speaker output. Hypothetically you could run 3 speakers outputting 300w in this setup.