Wired Installation LLC - Custom Titan 400 - version 1.0

[Kd8bao]

I was inspired by a fellow member on the site and by an off road up fitter down the road from me. The off road up fitter suggested the rear utility light with brake lights also. Then saw strobes n more with their back up light so here is our version.

Titan 400 Custom V1.0

- white / red / red / white

- 10' 4 conductor lead

- 7-pin trailer plug

- 12" long 2x2 square tubing

Utilizes the factory 7 pin system. Wired the light to use the left turn, right turn and reverse. So it is transferable to any vehicles with 7 pin. The unit can be hars wired into rear lights if wanted.

Titan 400 Custom V2.0 will have some more functional upgrades now that it has been in use for a bit now.

Check it out and let's hear the opinions.

Titan 400 Custom V1.0



Brake on



Reverse on



Both on



Video during day

Thanks guys

Wired Installation LLC

 

[pdk9]

That's pretty neat. How long did it take u guys to wire/configure it?

 

[Kd8bao]

Ordered with different colors and added the 7-pin and 2x2 for hitch. It can be mounted anywhere your imagination lets ya. Gonna swap the white and red today to split the turn up a bit.

 

[Kd8bao]

Titan 400 Custom - V1.1

 

[pdk9]

I like v1.1 a lot better with the turn signals spread out. Are feniex Titan modules easily swappable (plug and play like whelen) or dos you have to rewire the lightheads yourself?

 

[Kd8bao]

Take the end cap off and move them around. The end cap and clips hold modules in. There was enough wire to move where I needed without splicing. Took 10 min. Would have been 5 but my 2yo was helping me. Lol

 

[silverunicorn]

How much?!


I like V 1.1 with the spread out brake lights and turn signals.


Chris

 

[Carlos SpicyWeiner]

How much?!


I like V 1.1 with the spread out brake lights and turn signals.


Chris

available custom set up like this with any Feniex product. Just depends on what you need. Any of the python or cobra 400's and up can be set up like this from Feniex if you'd like. Thinking the 400 Python series is about $150ish

 

[Flashguy]

I actually had this exact idea about a year ago. I PM'd a guy on here that worked with trailers and hitches to come up with a fabricated bracket to hold two LINZ6 and would plug into the hitch. This set up you did looks even better. I like it! :thumbsup:

 

[Kd8bao]

Still has some fine tuning but there will be a V2.0 coming soon. Design is still early on.

 

[Eric1249]

Looks good. It looks like from the pic that 2 clear leds put out a good amount of light?