Ok I confirmed back, I only need the 1- 9 pin plug on the right...you're right the left plug is control head. I need the right one:
WHT/BRN) - Programable Input #1
2. (WHT/RED) - Programable Input #2
3. (WHT/ORN) - Programable Input #3
4. (WHT/YEL) - Programable Input #4 (Horn In)
5. (BRN) - Outlet #9 (Low Current / 250 mA Max.)
6. (RED) - Outlet #10 (Low Current / 250 mA Max.)
7. (ORN) - Outlet #11 (Low Current / 250 mA Max.)
8. (YEL) - Outlet #12 (Low Current / 250 mA Max.)
9. Not Used