2015 Chevy 2500 Slicktop Updated with pics and video

[txff914]

Here is another truck we completed, this is truck is used for hauling trailers for the pd and for the air support division. 

Front

Feniex Apollo universal split using Tahoe mounts

2-Feniex Apollo F6

Rear

Feniex Cobra 800

2-Feniex Cannon led hideaways

Controls 

Sound Off Signal nErgy 400 series 100 watt handheld siren

Sound Off signal 100 D siren speaker

Headlights only



Apollo visor and Apollo F6 Only



Headlights and Apollo lights



No lights on



Feniex Cannon hideaways in worklight mode

 

[pdk9]

I think the customer went with some patterns that are too fast (ie the TA pattern and the ILB Apollo modules changing from clear to R/B) but it's another nice truck by your shop.


I also think the cannons could've been utilized elsewhere on the truck since they'll likely be blocked (since the vehicles primary purpose is towing) and the cobra puts out plenty of rear output if the vehicle responds without a trailer IMO

 

[acala91]

Needs a HLF.

 

[Eric1249]

I agree it needs a HLF and slow the patterns down.  I would have put larger grille lights in.

 

[theroofable]

Looks good.  How were the grill lights mounted?

 

[txff914]

Looks good. How were the grill lights mounted?

Kinda hard to explain I had to make them out of 1/4x1/2 or something along the lines angle and thin strip of aluminum. There mounted using the screws that hold the crome grill part on. As far as the patterns those were my choice, Feniex only has a few good patterns for split lights. When the visor has the white flashing thats position 3 so I like patterns that are attention getting so that seems to be a good one, when the visor is flashing just red blue thats position 2 for sitting on scene. I was happy how it turned out, thanks for all the compliments.