So with Spring Melt wrapped, I figured I would inspect the booty.
Appears to be a very early generation Model 24E. Placement of the flasher is unique, the only other bar I have seen this with is the Baltimore Metro PD bar I got from way back.
Domes appear to be similar to ND spec as mentioned by other members. Its dirty, but very saveable.. so its on the project pile.
Motor reads 4/77, and the speaker while stating its a TS200 is obviously not, after removal its a standard TS24 (58w).
Speaking of speakers, if I plan on putting this back in, I will need the tray, or caddie that the speaker mounts to. The other one broke because the only thing holding it down was the plastic bell housing...
for the video folks..
Appears to be a very early generation Model 24E. Placement of the flasher is unique, the only other bar I have seen this with is the Baltimore Metro PD bar I got from way back.
Domes appear to be similar to ND spec as mentioned by other members. Its dirty, but very saveable.. so its on the project pile.
Motor reads 4/77, and the speaker while stating its a TS200 is obviously not, after removal its a standard TS24 (58w).
Speaking of speakers, if I plan on putting this back in, I will need the tray, or caddie that the speaker mounts to. The other one broke because the only thing holding it down was the plastic bell housing...
for the video folks..
