For Sale: Vintage Code 3 ArrowStik controller (6-LED)

I have (1) Code 3 ArrowStik 6-LED Controller. I had purchased this for my restoration before finding a complete ArrowStik with its own controller.

I do not have a need for this extra unit.

This was used to control the Code 3 ArrowStik amber light bar - usually referred to as the "Traffic Commander".

NOTES:

- This unit is used. Please review all pics for condition.

- The unit is “POSITIVE SWITCHED” for those needing to know this info.

- The exterior of box shows wear, but these are easy to restore - repaint, etc.

- I do not have any manuals or operating guides (however wiring diagram is on bottom of unit). I do not have any additional wiring (this would come from the ArrowStik to the back of the controller). No mounting hardware or brackets.

- It will need the green "L" terminal block that plugs into the back. It should be a 7-pin 5.08mm terminal block connector.
https://www.phoenixcontact.com/en-us/products/pcb-plug-mstb-25-7-st-508-1757064

These vintage Code 3 boxes are very hard to find in the (6) LED configuration, the units with (8) LEDs seem to be more common.

$68.00 Shipped to the US 48, insured and with tracking.

 

[TXDPSCJ]

Still have this for anyone interested

 

[TXDPSCJ]

I still have this part if anyone needs it

$60.00 shipped and insured with tracking #

 

[CD3]

Still have this for anyone interested

Would you consider a trade, what if anything would you need for an MX7000?

 

[TXDPSCJ]

Hi,

@CD3

Thanks for the interest.

I would be willing to trade for a 6-gang full size rocker switch box that looks like this one in my older thread on here:

Wanted: Modern - Federal Signal Switch Box

Hi all, Looking for this type of Federal Signal switch box, in same configuration: (Photo from online, photo credit and courtesy goes to T.Scharp). Does anyone know what the model number would be to this FS Switch Box?

elightbars.org

Or I’d be willing to reduce the price for the trade of the proper ArrowStik brackets (2) and bolt hardware that is used to mount the AS to a JetSonic lightbar; the AS hardware I’m referring to is seen in Post # 5 here:

Jetsonic with ArrowStik (TX) mount questions

Does anyone have any information as to how the Code 3 10-head ArrowStik was secured/mounted to the roof of the 80's-90's TX Police vehicles? I'm having a hard time finding info on this subject matter. I have seen multiple images online of in-service period images with the ArrowStik on the...

elightbars.org

Sorry, I don’t have anything that is MX7000.

If you don’t have any of the above, shoot me an offer shipped.

 

[TXDPSCJ]

Back up - still have the controller