Wanted Code 3 rx2700 parts

[EHFD_Tower_751]

So this might be a long shot, but im gonna do it anyways with this thread.

Would anyone (by the grace of god) happen to have the 2 smaller center section needed to do a 52" rx2700?? I have the frame and rest of the parts, but DONT have the 2 small 8" center sections (and top domes in clear).

Or should i just remake it back as a 47" bar and use the frame for an easier to build lightbar (still have the original frame the 47" bar was on, so thats no issue)

 

[shues]

Could you post photos of exactly what you're looking for?

 

[EHFD_Tower_751]

Theyre almost similar to the xf2300 smaller domes, but have screw holes like the center domes do for the excalibur, mx7000, 2100 i believe.

Circled part......credit to the member that had this bar listed here for sale (this is on ebay......cant recall member name here though)

 

[shues]

I've never seen an RX2700 like that before. Good luck in your search!

 

[Mack2340]

i have a brand new io board for a 2700.

 

[irishff]

Thats my photo and the bar is available. At this point I'm willing to part it out considering no one wants an all green LED bar.

 

[tmkkdorris]

I HAVE 12 XF 2300 R/B 48in LED BARS

 

[Doyle257]

I Do have the center lower lenses if you do decide to go back to 48"

 

[EHFD_Tower_751]

I Do have the center lower lenses if you do decide to go back to 48"

Actually still have the original center it came with, so im set with that.

Leaning towards making it back as original, and look for 2 modules i need for the rear outer spots, just have to tear back down my 360 bar

 

[2015-Impala]

So this might be a long shot, but im gonna do it anyways with this thread.

Would anyone (by the grace of god) happen to have the 2 smaller center section needed to do a 52" rx2700?? I have the frame and rest of the parts, but DONT have the 2 small 8" center sections (and top domes in clear).

Or should i just remake it back as a 47" bar and use the frame for an easier to build lightbar (still have the original frame the 47" bar was on, so thats no issue)

i have some full modules, a split module, a entire io board, a few 3 head reflectors as well as the normal,

 

[EHFD_Tower_751]

I need 1 red and 1 blue for the rear.

It doesnt have original due to being re-wired by original owner, sooooo i re-re-wired it like how my mx7000s are, just used splitters to connect everything together (front outers with rear outers....etc)

 

[2015-Impala]

i have a split all blue nodule which would go in rear center and i believe i have about 3 3 led reflectors, and 2 or 3 large blue full modules and entire IO board that i dont need. i need either a XLP interior in blue or an io board for one. or some other interior bar in blue for 18 explorer

 

[EHFD_Tower_751]

i have a split all blue nodule which would go in rear center and i believe i have about 3 3 led reflectors, and 2 or 3 large blue full modules and entire IO board that i dont need. i need either a XLP interior in blue or an io board for one. or some other interior bar in blue for 18 explorer

Do the modules you have look like this??

 

[EHFD_Tower_751]

Still seeking for these center things, as well as 1 red and 1 blue led head.

 

[EHFD_Tower_751]

Still hunting

Noone has parts for an rx2700, with the style heads i need ??

 

[Doyle257]

I'm getting a scrap RX2700 from a rolled over Albany county sheriff's car if my section of NY ever opens up again. I'll let you know what I have when I get it.

 

[EHFD_Tower_751]

I'm getting a scrap RX2700 from a rolled over Albany county sheriff's car if my section of NY ever opens up again. I'll let you know what I have when I get it.

Sounds good to me thanks

 

[EHFD_Tower_751]

Giving this a bump to say that along with the modules I STILL need, I'm NOW on the hunt for 2 red outer domes with the rx2700 labels on them (ones I currently have on the bar are from my ledx2100)

Hope someone has these parts.....the bar is possibly going to a friends fd for their brush truck, if not its gonna stay in my never ending collection.

Thanks guys

I NO LONGER NEED THE 2 SMALLER CENTER SECTIONS, CAUSE FRAME WAS CUT DOWN!!!!!! ( sorry for capslock by the way lol)

 

[EHFD_Tower_751]

Still needing:

1 red and 1 blue rx2700 modules
2 red outer tops

Modules I need are this style with the flasher circuit board with connector from the flasher board to lighthead itself