CrownVic97
Veteran Member
Had this lightbar in my collection for about 5 years. Time to let go since 1. I've got a 48" Code 3 XL sealed beam in the collection customized with Stingers and colored bulbs and 2. I needed to make room for my CST1S TwinSonic and Model 25 AeroDynic. It doesn't hold a real strong spot in my heart, but for someone else out there it does!
Driver's Side end cap was replaced with a spare XL9000 one, the one you see in the photo (original had a big crack up one side of the face, label wasn't great). There's sun fade on the label, slight yellowing of the clear plastic, and there was a blemish on the "O" of "Code 3 XL" where part of the label was nicked by something. I used black permanent marker and patience to fill it in carefully, then a piece of chrome tape to mask the backside inside the cap. The other side is the original end cap.
Everything on this bar works great! Lenses were restored as best as they could get, but are very clear for display. All rotators run smooth. The front amber flashers are on a Tridon EL-34A alternating flasher.
Asking $225 plus shipping
Thanks for looking!
Driver's Side end cap was replaced with a spare XL9000 one, the one you see in the photo (original had a big crack up one side of the face, label wasn't great). There's sun fade on the label, slight yellowing of the clear plastic, and there was a blemish on the "O" of "Code 3 XL" where part of the label was nicked by something. I used black permanent marker and patience to fill it in carefully, then a piece of chrome tape to mask the backside inside the cap. The other side is the original end cap.
Everything on this bar works great! Lenses were restored as best as they could get, but are very clear for display. All rotators run smooth. The front amber flashers are on a Tridon EL-34A alternating flasher.
Asking $225 plus shipping
Thanks for looking!
