Code3 intersection lights

[denko3]

Does someone knows how to convert
Code3 intersection lights 120'degree into
Pursuit lights 70' angle?
If i am right the something on same tray must be change from one point to another????

 

[Mars Light]

What about the holes on the gear? Is this a way to change the angle.

 

[denko3]

Huh don't think so but will try....
Yes i now Mars usually the gear have holes for angles....

 

[Benno]

What about the holes on the gear? Is this a way to change the angle.

No!

Does someone knows how to convert
Code3 intersection lights 120'degree into
Pursuit lights 70' angle?

You have to change the angle of the reflector on the bracket. And the position of the pivot pin for the control arm is behind the reflector and not beside.
Tomorrow I can make a Photo from a pursuit light next to a intersection light to show the difference.

 

[denko3]

Thanks Benno yes please do.
So it is easy to convert then.....

 

[Benno]

Here they are:


left = intersetion
right = pursuit

 

[denko3]

So if i see right you need to change 2 things: ?
-Black plastic bracket for angle
- and metal pivot pin
How can i change the pivot pin for one point to another?
Were pursuit and intersection light used with fast and slow motor?

 

[Benno]

So if i see right you need to change 2 things: ?
-Black plastic bracket for angle
- and metal pivot pin
...

2-3 things:
- position metal pivot pin
- reflector angle on the bracket with the pivot pin (2 rivets)
- and may be the direction of the control arm

...
How can i change the pivot pin for one point to another?
Were pursuit and intersection light used with fast and slow motor?

The pin is riveted, so could be difficult to rivet it new after drilling it out. May be welding after repositioning?
I think both have the slow motor.

 

[denko3]

Ok will try and see....
Thanks for right directions....

Will replay when i will make it.thanks guys again!