Cuda TriOptic SignalMaster wired to Whelen TACTLD1?

[FDNY 10-75]

I have a Cuda TriOptic SignalMaster with the original controller, I recently purchased a Whelen TACTLD1 and was wondering if I could use them together? Thanks

 

[rwo978]

Should be able to. Red from the SM will go to the white of the controller. You'll have to trial/error the other individual light wires.


I've done it reversed (Whelen TA on a SS2000SM). Worked fine.

 

[John Hearne]

I'm running one off of my Cencom. I'll try to post which wires are which for you when I get home.

 

[fcicars]

The wirng for a standard Signalmaster left to right is:


white


brown


green


orange


violet


grey


yellow


blue


Red - power


The standard wiring for a Whelen TA is:


brown


red


orange


yellow


green


blue


violet


grey


white - power

 

[FDNY 10-75]

Thanks!

 

[EL1998P71]

Not entirely off, but I did use a TACTLD1 with a Vector Signalmaster and it worked fine.


But now with the Cap on my truck, the Signalmaster would be blocked, so I removed it and


mounted it on the back cap door. Now the cable is shorter, so I wired it to the 2 wire control


from an InnerEdge (8 lamp TA with End Flasher board)