I as well as a few other members here are trying to get some of the Diagnostic serial bars that have no controllers to be useful and get a controller made to be able to work these bars without rewiring them
ideally we would like to make an equivalent to a wecan control point.
we have another member @RS485 who has decoding done on some controllers
So far I have configuration #s
CT State Police
78
88
289
Mass Highway
422
Dip switch configs
78 1 off. 2,3,4 on. 5,6 off. 7 on. 8 off
88 is the same as 78
289 ALL OFF
422 1 off. 2,3 on. 4,5 off. 6 on. 7,8 off.
Now wit the CT controllers the RJ45 on the back is not used in their system,
The Mass Highway controllers are RJ45 connected to a traffic advisor controller
As for the internal boards we seem to have 2 confirmed part numbers of
Serial Control Receiver 01-0266955-00C
MC4 Serial Receiver 01-0268036-00C
We have not confirmed the differences in these yet
Now in the CT state police & Mass Highway bars off that main board the strobes then go into a Sense board
Part numbers
Serial Diagnostic Sense board 01-0266992-00B
Serial Diagnostic Sense board 01-0266992-00C
I have not seen these in any other bar yet, these are connected via a grey cable with 5 pin end on the white plug from the main board
On the Mass Highway bars there is a different board plugged into the far right plug black connector 8 pin plug which is the traffic advisor board
Part number
Serial Control Traffic Advisor 01-0266967-00C
For those that want to help, we can use the picture of the inside of your controller with the dip switches and configuration number.
And someone who can take the data from user RS485 and make something similar to a wecan control point for these bars
also any other data or knowledge that you have!
I have about 100 more CT state police edge bars to pull apart as well as some other random models in the parts piles those will be in the comments as I have time
ideally we would like to make an equivalent to a wecan control point.
we have another member @RS485 who has decoding done on some controllers
So far I have configuration #s
CT State Police
78
88
289
Mass Highway
422
Dip switch configs
78 1 off. 2,3,4 on. 5,6 off. 7 on. 8 off
88 is the same as 78
289 ALL OFF
422 1 off. 2,3 on. 4,5 off. 6 on. 7,8 off.
Now wit the CT controllers the RJ45 on the back is not used in their system,
The Mass Highway controllers are RJ45 connected to a traffic advisor controller
As for the internal boards we seem to have 2 confirmed part numbers of
Serial Control Receiver 01-0266955-00C
MC4 Serial Receiver 01-0268036-00C
We have not confirmed the differences in these yet
Now in the CT state police & Mass Highway bars off that main board the strobes then go into a Sense board
Part numbers
Serial Diagnostic Sense board 01-0266992-00B
Serial Diagnostic Sense board 01-0266992-00C
I have not seen these in any other bar yet, these are connected via a grey cable with 5 pin end on the white plug from the main board
On the Mass Highway bars there is a different board plugged into the far right plug black connector 8 pin plug which is the traffic advisor board
Part number
Serial Control Traffic Advisor 01-0266967-00C
For those that want to help, we can use the picture of the inside of your controller with the dip switches and configuration number.
And someone who can take the data from user RS485 and make something similar to a wecan control point for these bars
also any other data or knowledge that you have!
I have about 100 more CT state police edge bars to pull apart as well as some other random models in the parts piles those will be in the comments as I have time
Attachments
-
269799402_249000030671829_7647734084098750784_n.jpg174.8 KB · Views: 16
-
269655487_497156418342857_5134473417540340113_n.jpg202.7 KB · Views: 12
-
269602847_1042507919815681_3194308956510215089_n.jpg184.4 KB · Views: 11
-
267304179_1970789199757867_6971795658396759168_n.jpg181.3 KB · Views: 8
-
267263057_626228755284047_8219488002794122853_n.jpg176 KB · Views: 8
-
267132937_701965634102779_5196786473656293098_n.jpg158.7 KB · Views: 8
-
265935134_436935151374375_8936718627507219611_n.jpg190.8 KB · Views: 13