hi all
this trick because i d like to remplaced my vista lower section in leds ( i have halogen at this time )
i buy all on e bay in china by merryday168
3 leds pcb , 1w led emmiter and collimator
i buy also lm 317 regulator and 38 ohm 1w resistor
all cost about 6$ for all
first : i weld all my led in pcb in serial +/- +/- +/- and i paste emmiter with glue
second : I connect negative pole on ground
I connect positive pole on pcb RED ( see pics added) and relayed on lm 317 with resistor
POSITVE OUTPUT IS AMBER (see pics)
i applied 12v or 24v and run
this is a simply module steady burn version and requered a flasher
drive all 1w or 3w power leds color
i built a signalmaster with ( send me your mail if interessed)
thanks for reading
this trick because i d like to remplaced my vista lower section in leds ( i have halogen at this time )
i buy all on e bay in china by merryday168
3 leds pcb , 1w led emmiter and collimator
i buy also lm 317 regulator and 38 ohm 1w resistor
all cost about 6$ for all
first : i weld all my led in pcb in serial +/- +/- +/- and i paste emmiter with glue
second : I connect negative pole on ground
I connect positive pole on pcb RED ( see pics added) and relayed on lm 317 with resistor
POSITVE OUTPUT IS AMBER (see pics)
i applied 12v or 24v and run
this is a simply module steady burn version and requered a flasher
drive all 1w or 3w power leds color
i built a signalmaster with ( send me your mail if interessed)
thanks for reading
Last edited by a moderator: