Fusion Surface Mounts on External Flasher?

[julietbravosierra]

I have done some looking and seen some info on other models external flasher capabilities, but I wanted to check and see if the feniex fusion surface mounts can be used with an external flasher effectively.

I had done an install with some apollo surface mounts a couple years ago and had to use the slowest single flash pattern to even get them to illuminate properly with the external flasher we were using and just wanted to make sure I wasn't going to run into the same thing this install.

Thank you.

 

[bullfrog4ever]

The Fusions work the same as the Apollos, they don't play nice with flashers, unfortunately.

 

[Jman423]

The Fusions work the same as the Apollos, they don't play nice with flashers, unfortunately.

Agreed. You’d need dummy modules from a stick, and there are no surface mounts for those.

 

[julietbravosierra]

The Fusions work the same as the Apollos, they don't play nice with flashers, unfortunately.

Agreed. You’d need dummy modules from a stick, and there are no surface mounts for those.

Thanks very much Gents. By happenstance the customer came back and said they needed to go with a more budget-friendly option anyway so we will be using T3's.