HHS2200 programming question...

[UndercoverVLS]

Hey guys, I pretty much figured out this entire program by playing with it, but I'm stuck on one thing:

When I choose to "turn on" my handsfree button, it is automatically turning off and "blocking out" the middle left button, which I guess would be #4. This button is the factory Siren control but I have it set to only be an On/Off button for my interior light bar.

So I have slide switch 3 to activate all my lights, and also turn on Handsfree. However, when this happens it forces button 5 to "turn off", so I will lose my lightbar. I've tried everything and can't get it to stop doing this.

I thought maybe keeping the output that the lightbar is on, set to on, and maybe that will bypass it, since it's only turning off the button selection.

Any ideas?

 

[buddek09]

You will have to use a different output for the interior lightbar. The HandsFree is setup from Whelen to turn off both the Siren button and that output, their is no way to override this setting.

 

[UndercoverVLS]

I was able to get it to work shortly after I posted this.

I switch 5 was still set as a "siren" function but programmed to turn on an output. Once I changed it to a slide switch option, it all cleared up.