Okay, so I took the whole bar apart. Gutted it. The takedown flasher was a simple power wire that I had hooked to a ground (as per whelen's site it said it was a ground). So those are all back up and working again. Someone was in the bar before me though. 2 of the strobes had been replaced. I believe 1 in 08 and 1 in 09. The power supply was also not bolted down. It was only "resting" on the mounting bolts. I re zip tied the wiring and organized it so I know whats what and it looks factory again. I took the power supply out, and hooked it to my truck battery directly. (not thru the wiring harness that comes out of the bar) I took 2 strobe tubes that I had layin around from a fasttrax and pluged them into the supply. And got nothing. No sound, buzzing, or humming. The wires coming out of the supply are as fallows. Red, Black, White, Purple, Blue, and Green. Red and black are power and ground. I would assume the white, green and blue are control/pattern. Atleast all but white are control. The purple is high and low functions for the supply. I know the strobe tubes are good that I used. The supply has a 2 dates written on it. 1 says 06 and 1 says R-07. I forget the months off hand but I know the years. I am thinkin the supply is shot. Any thoughts guys? How long are the supplies warrentied for? I am hopin to get it warrentied if it is covered because that would be free then. I mean who doesn't like free right.