EL1998P71
Member
As requested by JennyCop, Here are some photo's of my S&W 8887.
This started out as a Waterford, MI Police Red/Blue bar.
Domes were broken.
So I took this completely down to bare bones.
Repainted the frame, bulb holders, ect.
I replaced the wire retainers, gaskets, screws, ect.
And bought new EEC domes from a local place.
I originally bought new rotators from able2. The ones in the photo looked exactly like the old ones.
But when I got my set of 4, they were completely different.
I now have a doaner bar for the rotators. I'm also changing it up a bit. It will be red DS and Clear PS.
I know some things don't belong, like the 700 flasher and power blocks, but this project was from 8 years ago. I just wanted a working bar not factory correct.
So here are the photo's.....
This started out as a Waterford, MI Police Red/Blue bar.
Domes were broken.
So I took this completely down to bare bones.
Repainted the frame, bulb holders, ect.
I replaced the wire retainers, gaskets, screws, ect.
And bought new EEC domes from a local place.
I originally bought new rotators from able2. The ones in the photo looked exactly like the old ones.
But when I got my set of 4, they were completely different.
I now have a doaner bar for the rotators. I'm also changing it up a bit. It will be red DS and Clear PS.
I know some things don't belong, like the 700 flasher and power blocks, but this project was from 8 years ago. I just wanted a working bar not factory correct.
So here are the photo's.....