Omega 90 Duals

[philyumpshus]

I finally got my dual Omega 90s hooked up to a 9000 controller. Everything works except the air horn tone; when I push the air horn button I get manual tones. I checked the Omega 90 manual online but I couldn't find anything on it. The tone is enabled because it sounds when the sirens are in Sweep I just can't use it standalone.

 

[r1ms12]

Do you at least get the airhorn tone when using the "airhorn" input on the back of the controller?

 

[philyumpshus]

As far as I know there is no airhorn input. That's what's really bugging me- FedSig doesn't have the 9000 controller manual on their website. I get horn in Sweep just not on its own.

 

[r1ms12]

My bad, I misread and thought you had an 8000 controller. Call unitrol in CA - their tech support has always been very helpful.

 

[Black Hoe]

Check the dip switch settings inside your Omega 90's to make sure the airhorn tone was enabled or not.

 

[chuckie321]

Check switch wiring. I had some 9000 heads that were wired where both sides of the momentary switch were wired for airhorn.