Wanted Rear Window LED Explorer PIU CHMSL

[MeadeCoSD]

Looking for the original rear window strobe lights for the 2013 Explorer PIU. The mount brackets are still there, but the lights are gone.
They would have been part of the 66 optional lighting package? Is that right?
Does anyone know what lights they were? Ray Allen package.

 

[MeadeCoSD]

These are the lights I’m looking for.

 

[Dave F]

my guess is the code 3 wingman

regardless of brand, its a CHSML mounted light assembly

also to help your search i edited your title, as those are led’s, not strobes

 

[MeadeCoSD]

Thank you so much for your help!

 

[MARTIN G.]

Looking for the original rear window strobe lights for the 2013 Explorer PIU. The mount brackets are still there, but the lights are gone.
They would have been part of the 66 optional lighting package? Is that right?
Does anyone know what lights they were? Ray Allen package.

I believe they come with whelen Ions.

 

[MeadeCoSD]

I believe they come with whelen Ions.

Thanks! I'll look them up and see what I can find. I saw a photo on Ebay a few months ago, of a 2013-2015 PIU Explorer that still had these lights installed. I still have the gasket marks on my glass from the lights. Anyhow, I emailed the guy on Ebay, and he said whatever the lights were, that they were already gone. Just my luck, eh? They had rectangular housings, though, not rounded, like all the ions I keep seeing.

And, the mount brackets are still there. Oh, also just to clarify, they were mounted up by the rear window visor, inside the glass, on either side of the third brake light.

 

[MARTIN G.]

Thanks! I'll look them up and see what I can find. I saw a photo on Ebay a few months ago, of a 2013-2015 PIU Explorer that still had these lights installed. I still have the gasket marks on my glass from the lights. Anyhow, I emailed the guy on Ebay, and he said whatever the lights were, that they were already gone. Just my luck, eh?

I'm 99% sure they had whelen Ions. Unfortunately I don't have a that year car right now, I have only new cars in my shop, and they still using whelen. I even have the templates to install a new ones. I'll look tomorrow and see if I have any parts that you can use.

 

[MeadeCoSD]

They must have looked something like the lower part of these Whelen Spitfire or Avenger lights. They would have been rectangular like this, but mounted to a flat bracket with little tiny screws (many of which were scattered in the back).
I would be super excited if you had them! I'll post you a pic of the mount brackets tomorrow in the light....

 

[billyfromhill]

They were Ions with custom Ford brackets and shrouds. You can get the parts from Ford but it's pricy. I would recommend two Spitfire Ions. You should be able to rewire the Spitfire Ions for sync if you make your own wiring harness.

 

[MeadeCoSD]

Great information, thank you! If nobody has a set of the shrouds, I’m thinking if I could get a hold of an old one, or even one new one, I would just 3-D print the other.
So do you know which ions they actually were?

 

[MeadeCoSD]

Fortunately, the brackets and connectors are still there.

 

[NoLimitSquads]

They are Whelen Ions.

 

[NoLimitSquads]

 

[Dave F]

View attachment 228649
They are Whelen Ions.

those arent ions, theyre whelen linz. ions are much thinner as shown below



whelen linz below

 

[MeadeCoSD]

View attachment 228650

Would you happen to be able to read that part number on them?

View attachment 228649
They are Whelen Ions.

Yes, that’s exactly what I’m trying to replace.

 

[billyfromhill]

The Ions are the factory Ford brackets & shrouds. The LINZ6s below were added by the upfitter. In post #14 you can very clearly see they are Ions.

 

[NoLimitSquads]

Those bottom lights are actually Code 3, not even Whelen. As for the part numbers on those shrouds...

 

[NoLimitSquads]

Also, these shrouds are all the same through the 2019s. The 20s are different.

 

[MeadeCoSD]

Those bottom lights are actually Code 3, not even Whelen. As for the part numbers on those shrouds...

I can't thank you enough for that!!! THANKS!!!

 

[MeadeCoSD]

Police Car Conversion FORD Explorer 2011- (TUB)

Police Car Conversion FORD Explorer 2011- (TUB)

ford.7zap.com

This link might be helpful to others. I searched the part # for one of the shrouds, and got here.

 

[NoLimitSquads]

I can't thank you enough for that!!! THANKS!!!

No problem!

 

[madpd97]

What color are you looking for?

 

[madpd97]

I've got shrouds and blue Whelen "fomoco" ions available.

 

[MeadeCoSD]

I would love to have the shrouds. Looking for amber ions.

 

[MeadeCoSD]

I've got shrouds and blue Whelen "fomoco" ions available.

Let me know what you want for the shrouds, and my ZIP Code is 57785.

 

[Joe Walter]

I have a set of shrouds as well

 

[MeadeCoSD]

I’d be happy to buy them from you if you don’t want too terribly much for them. USPS flat-rate shipping would run like $12-$14. My zip code is 57785.

 

[KW76]

if you need a set of Amber IONs I have a couple pairs. 2018 dates. Shoot me a PM if interested $125 for the pair shipped

 

[MeadeCoSD]

Do they have the original mount brackets with them?

 

[KW76]

Do they have the original mount brackets with them?

I do not have the OEM Ford brackets for them, Sorry, just the IONs Lightheads