Swapping Dominator TIR3s

[rjk512]

I have a Dominator with 2 TIR3s in it, and was interested in swapping them with different color TIR3s and have a few questions...

A) Is this possible?
B) What kind of plugs are on the end of the lightheads inside of the housing?
C) What types of TIR3s in particular are required for this?

Thanks in advance!

 

[hawkspringsfire]

I have a Dominator with 2 TIR3s in it, and was interested in swapping them with different color TIR3s and have a few questions...

A) Is this possible?
B) What kind of plugs are on the end of the lightheads inside of the housing?
C) What types of TIR3s in particular are required for this?

Thanks in advance!

Yes it's possible, you can use either a 2 wire or four wire version tir3, the usually have a white plug that's plug and play.

 

[hawkspringsfire]

If you use the four wire version you'll have to set it to steady burn.

 

[hawkspringsfire]

Plug kind of looks like this
https://www.jameco.com/z/39-01-2020...8Jl66xAeproJOzhtj1fEHg9j5RINE8phoCM0MQAvD_BwE

 

[rjk512]

Thanks for the info.

Is it possible to swap in LINZ6's the same way?

 

[hawkspringsfire]

Thanks for the info.

Is it possible to swap in LINZ6's the same way?

Yes you can swap them out too.