Haven't posted much since the old board, but, I have a 12 and 12 CTS, both series A1, but the CTS seems to slow down after 10 to 30 seconds, without the front or rear stationary lights on, but the non CTS stays spinnig for at least 5 minutes, after I run the CTS. Both have been cleaned(chains, rotators, motor gears) and lubed. The CTS has about a six foot long wire, and the 12 has about a five foot long wire, but with maybe a 12ga wire, thin strand, and the CTS about a 10 ga wire, slightly thicker strand. Any thoughts?