ULB-42 Starburst Phantom, Whelen Avenger R/RW, Slimlighter RR, Speakers, Edge part out, Lin4, Switch

Status
Not open for further replies.
Nov 1, 2010
232
Mass.
All prices are OBO... Let's make a deal!

Items I'd like to trade for:

- Whelen Vertex in white, red or amber; or other LED hideaway

- Strobe hideaway kit... preferably 60w with 4 outlets or 90w with 6

- 4x Strobe cables, 15' or 20' preferred

- Fog/driving light kit...something like PIAA or Hella or the like

1.

Whelen Mini Edge 9000 part out/package deal

- I am parting out a Mini Edge that came with a blown EB-6 power supply and Blue lenses with white endcaps.  It had four corner strobes and alley lights (alley lights are not listed yet); I also have some random Edge parts listed here.

- Edge frame SOLD

- set of lenses from a full sized Edge Bar in Red, with alley light cut outs, solid 8/10 condition. two 11" sections and two 17." sections, plus end caps... $make an offer

20140810_220403.jpg20140810_221740.jpg20140810_221807.jpg

- Whelen UB412 Power supply, excellent aesthetic condition and was certified as working when I bought it. I have not installed it. $50

20140810_214607.jpg20140810_214621.jpg

- set of lenses from the above Mini Edge, Blue with White end caps with alley light cutouts. Blue lenses are a tad faded and the white endcaps have some yellowing/weathering.

$make an offer

20140810_220430.jpg

- Four corner strobes, mfg date 1999. working when taken out of service. $8 each or $20 for the lot

- they certainly show their age, but fired as they should when the bar was taken out of service

20140810_220243.jpg

- lengthy power cable for the Edge; currently has amp connectors for a EB-6 power supply $make offer

The Edge came with a blown EB-6 power supply and I got in a UB412. If one was inclined to swap that in they'd have a working Edge, I just don't have the time to tinker with it right now.

If someone wanted the whole lot I'm certainly open to discussion!

2.a

Pair Code 3 3UP LED hideaways, Red. NOS, factory sealed package. $50

- they say they're for the headlights of a ~05 Crown Vic but you can make them work in a lot of applications (not exterior rated)

20140810_215431.jpg

This is an example of the same kit:

http://www.swps.com/code-3-led-hideaway-kit.html

2.b

Same as 2.a but out of package and with the brackets modified a bit (as shown in pictures). Never installed, taken out to demonstrate/fiddle with. $OBO

[SIZE=13.63636302948px]20140810_215325.jpg[/SIZE]

3.

2x Pairs Whelen Lin4, white/white. Excellent condition, I still have at least one of the bags they came in. Come with black flanges and foam gaskets. $70/pair OBO

- one pair has approx 5" of wire and mfg dates of 07/09

- the other has longer wire and mfg dates of xx/xx

20140810_215054.jpg

5.

Galls Traffic Backer. $SOLD

- has a sticker on it that says "Do Not Install in Ford Vehicles"

- positive switched, as far as I know

20140810_214940.jpg

6.

Emergency Technology, Inc. (old name for SoundOff Signal) Road Runner HLF. $SOLD

- older but was working when I purchased it. has some aesthetic damage but according to the users here (I can post the thread if someone wants) it won't affect the unit's operation. 

20140810_214921.jpg

7.

Whelen SpecTir R/W. mfg date 2009. Full, uncut cord and suction cups. Only issue is you need to use a pen to change the patterns as the button is missing.

$65

20140810_215720.jpg

8.

2x Whelen Dual Talon flashback shields. I'm not sure what it would take to ship these but I'm thinking $10 each? Each has two small holes in it from when I tried to make them fit Avengers but it doesn't affect the light blocking. Both Sold

20140810_222318.jpg

9.

Whelen single DashMaster strobe. Works, but cord is cut short and it doesn't have brackets or a lens. $make offer

20140810_214642.jpg20140810_214656.jpg

10.

Whelen Dual Avenger R/W. model AVN2. MFG date 06/12. Currently has ~18" of cable with pigtails, can either come with a brand new Feniex cigar plug with pattern switch (same as comes with an intact Avenger) installed by me, or I can include it... or it can just come with the open wire for less $.  This unit also comes with a headliner bracket. $SOLD

20140925_223813.jpg

11,

Whelen Slimlighter R/R; 5mm version. Cut cord and aftermarket suction cup brackets. $70 OBO

20140810_220003.jpg

12.

Federal Signal TS-100 Speaker. It came out of a Aerodynic and has a bracket. It shows its age but it was working when taken out of service. $Make an offer

20140810_222531.jpg

13.

Code 3 Siren Speaker. With bracket. It was certified working when I bought it a few years ago, I took it apart and never felt like putting it back together $Make an offer

20140810_222639.jpg

I also have a few of these TIR4s in Amber from a Voltex traffic advisor I took apart (as well as some other parts including its control head) that if anyone wants to make an offer on... I believe I have five working

20140810_215510.jpg

14.

PAIR Whelen TIR6.  Red, four wire.  Come with black flanges, one of which is cracked but still functional (I have electrical tape on it).  These are solid red, they do not do split patterns.  $80 OBO

- currently mounted on my vehicle, pictures pending

15.

SVP Starburst Split Phantom (ULB-42 DLP).  Universal, Red with takedowns.

Setup is as follows   R/R/R/TD - TD/R/R/R

$SOLD

20141009_155822.jpg

More items to come!

20140810_214957.jpg

20140810_221210.jpg
 
Last edited by a moderator:
Nov 1, 2010
232
Mass.
Sorry FireRescue462, I'm not really looking for any trades at the moment.

edit: now that I added stuff for trade this comment is kind of foolish...
 
Last edited by a moderator:

hfdemt4095

Member
Jul 1, 2014
492
Holliston ma
Good to know! Can the take downs flash independently? I'm starting to like this bar more and more. :)

I currently have this bar but without the take downs, I love it, but wish mine had take downs.


Here's a video of the bar in action behind dark factory window tint: http://youtu.be/g-FxsWgsveU


And here's a video of it in action, this really shows how much the "intersection" module helps out with, well, "intersection" visibility: http://youtu.be/yicCl5tXIQU
 
Nov 1, 2010
232
Mass.
Good to know! Can the take downs flash independently? I'm starting to like this bar more and more. :)
Yes.  The bar comes with pigtail wiring that is as follows:

1 wire is power to flashing LEDs (3 modules on each side)... connected to +

1 wire is ground for the bar... connected to -

1 wire is pattern change for flashing LED modules... momentary + when the flashing LED power wire is activated

1 wire is steady burn for takedowns (+)

1 wire is for wig-wag takedowns (+)

I had it wired to a Whelen cigar plug/switch, I connected the wig-wag takedown wire and flashing LEDs wire together so they'd both come on when I flipped the switch because that's the only mode I ever needed.  It just has the factory pigtail wiring on it now though.

The only catch is that you can't change the pattern on the flashing LED modules (with the bar-mounted pattern change button) while the takedowns are activated. I don't know why.  So, I just set it to a pattern that I liked and had the takedowns wig-wag and that's it haha.

There was a great video review of it on Youtube, but I can't seem to find it unfortunately.
 
Last edited by a moderator:

Hoff

Member
Aug 2, 2011
892
SW Ohio/US
PM sent
 
Status
Not open for further replies.

Forum Statistics

Threads
54,191
Messages
450,585
Members
19,194
Latest member
kevieandrew

About Us

  • Since 1997, eLightbars has been the premier venue for all things emergency warning equipment. Discussions, classified listings, pictures, videos, chat, & more! Our staff members strive to keep the forums organized and clutter-free. All of our offerings are free-of-charge with all costs offset by banner advertising. Premium offerings are available to improve your experience.

User Menu

Secure Browsing & Transactions

eLightbars.org uses SSL to secure all traffic between our server and your browsing device. All browsing and transactions within are secured by an SSL Certificate with high-strength encryption.