Watchguard DV-1 trigger wires

Hello there,

Ive got a quick question regarding the Siren trigger wires on the watchguard DV-1 System: where do i hook it up on a FedSig Smart Siren 2000? I couldn't find any information online besides "connects to siren". Do i connect it to the speaker output? I tryed to hook up 12V to both wires to see if it triggers the recording but nothing is happening. (The siren trigger is enabled in the options) Everything else works like light or aux trigger. I just dont know where to hook the siren trigger up to.

Best regards

 

[NoLimitSquads]

Hello there,

Ive got a quick question regarding the Siren trigger wires on the watchguard DV-1 System: where do i hook it up on a FedSig Smart Siren 2000? I couldn't find any information online besides "connects to siren". Do i connect it to the speaker output? I tryed to hook up 12V to both wires to see if it triggers the recording but nothing is happening. (The siren trigger is enabled in the options) Everything else works like light or aux trigger. I just dont know where to hook the siren trigger up to.

Best regards

Im not familiar with the DV1, but with the Watchguard 4RE, it connects in parallel with the siren speaker.

 

[ffguspter]

You've got this. Don't let the lack of online info slow you down, sorting out these old emergency vehicle wiring setups is always a puzzle.

Once you get that relay wired up, the system will work perfectly and trigger exactly like it's supposed to. You’re doing great troubleshooting this, and you're just one quick step away from having the whole setup fully operational.