Solvarex said:
Speaking of checking first, the "SignalAlert" flash pattern is the default pattern on all of Whelens SAE and FMVSSA CERTIFIED brake lamps. This has not been discontinued, nor will it be.
Last edited by a moderator:
Whelen Halo LED System
- Thread starter unlisted
- Start date
Speaking of checking first, the "SignalAlert" flash pattern is the default pattern on all of Whelens SAE and FMVSSA CERTIFIED brake lamps. This has not been discontinued, nor will it be.
I put a rear 4 bulb system , and a front system in my crown vic, it went fairly well, to ease in the install I chopped off the weatherproof connectors and used standard amp connectors/ pins ( strobe connectors) if done correctly when the system is removed you can just plug in the stock stuff, you will have an extra inline connector but who looks at that when you sell it right.
I understand that trial and error can lead to a butchered wire harness , but realistically this system is no harder to install than a taillight flasher.
the only real complaints I have are:
1) the connectors, why? this system is to be mounted in a dry place, why make it more complicated w/ the weatherproof ones
2) no sync for other led products , how hard would that have been? imagine being able to sync a pair of vertex heads for the reverse lights..
Im looking for a red/ blue front set of anyone has one, I have a amber amber to trade. thanks Shawn
I understand that trial and error can lead to a butchered wire harness , but realistically this system is no harder to install than a taillight flasher.
the only real complaints I have are:
1) the connectors, why? this system is to be mounted in a dry place, why make it more complicated w/ the weatherproof ones
2) no sync for other led products , how hard would that have been? imagine being able to sync a pair of vertex heads for the reverse lights..
Im looking for a red/ blue front set of anyone has one, I have a amber amber to trade. thanks Shawn
I put a set on my 2004 F250. Works great with the stock 04 lamps and my new 05 headlight lamps. I just wish I had the Amber/Clear instead of Amber/amber
I just purchased a 2 head red/red kit for the tail lights. I have 08+ ford superduty tails in my 05. Im putting an aftermarket bumper on with 2 oval cut outs where I will install 2 500 series stt. Been wanting to do it for a long time. Ill appreciate the signal alert for winter time.
I want to get a pair of two lamps for the rear for my Expedition.
But what I am wondering is why, they are only for the 06-07 CVPI, when 2000-11 CVPI all share the same housing.
But what I am wondering is why, they are only for the 06-07 CVPI, when 2000-11 CVPI all share the same housing.
Itz what they were FMVSS (or whatever that is called) certified for. Legally they are not approved for any other vehicle.PTRJason said:
Makes mewonder how legit those aftermarket led auto bulbs are online....
LSH Lights has the 4 head red halo's on clearance for $299.99, cleaning out inventory, i suppose. I'm thinking about a set. In your opinions, are they worth that price?
nybucketman said:
For ra 4 head, new, that looks like a really good price. But depending on your vehicle, you may only be able to use two heads unless you have 4 head brake lights.
That's when one needs to get creative with a hole saw, dremel and some spare bulb harnesses... make 2 more light sockets! :woot:PTRJason said:
LSH Lights also has the two head system in white/white. In the description, it states amber included by default. Does that mean each lighthead is amber/white or or are they white/white?
If one can't luck up and find a set for $80 shipped like you did, and you really want a HALO kit, then it's worth the money, IMO.Spastik Monkey said:
I am assuming that the kit is for the front turn signals for a CV since they are amber when in "normal" mode and then flash white/clear in "emergency" mode.nybucketman said:
Here is the link...
LSH LIGHTS - Whelen LED Hide-Away
The cost of this kit is $370 or so. Kinda high for a two head kit IMO.
Last edited by a moderator:
Installing mine tonight. The color wires are also the same from my tail light connections per instructions. So thats good! Ill be sure to take pics. Also 1 question,
The wires from the power supply, do those power the STT's and flasher function?
The wires from the power supply, do those power the STT's and flasher function?
Also seems ill have to custom lengthen one of the whelen supplied cables. Any extra tips? Looking forward to installing these and posting up a review.
unlisted said:
I wonder why mine is 212.00 when added to my cart? Or maybe someone on here is working for them and fixing the prices, since it was mismarked to begin with?
I want an A/A front and a two hear rear system. I guess I can save for the 4 head and always save the two heads in case I ever get a different truck or car.
