Whelen L360 patterns

[ttfd14]

I was curious how you change the flash pattern on a Whelen L360?? When you take the top off there is a single wire that is used to change the patterns, but I am not sure how.. Any help would be appreciated..


Thanks

 

[John911]

+12VDC to violet/white wire; momentary switch ideally.

 

[H.A.]

Judging from your description, you have a cig plug/mag mount model?

 

[dmathieu]

When I had a mag mount l32, I brought the pattern wire up to the top of the opening and put a wire nut on it. Then when I wanted to change pattrens, I would remove the dome, apply +12v to that wire (lessthan 1 second to move up one, more than 1 second to advance through patterns). When done, recap and tuck in wire and replace dome.


Dan

 

[ttfd14]

Judging from your description, you have a cig plug/mag mount model?

I do have the cig/mag mount unit. I have figured it out now. Did not know it was a positive for the pattern change..


Thanks, for everyones help!!

 

[VolEms]

How much did you pay for the L31 mag mount. I am looking for one in Red but they cost like $300 I think thats way too much.