WigWag Module on leased vehicle

[motor1]

I would like to install a wigwag module into a leased vehicle. Any ideas of how to do this WITHOUT cutting of the vehicle? 

I want the rear tail lights on the module. I have done this exact install on a F150 but the owner allowed me to cut and splice since it was a purchased vehicle.

The new one is a 2015 Hond Fit. I am wondering if there maybe a y connector or something I can use on the back of the light in order to get power and supply power as well. 

Ideas? 

 

[massfirefighter]

Cut it and turn it in when you're done. They don't look that deep when you turn in a lease.

 

[motor1]

Well my other thought was... I am going be putting some trailer wiring on the same vehicle. Seems I can get a no-cut harness for that.... perhaps i can splice into that harness?  

 

[Jarred J.]

with some diodes, its possible.

 

[EricTheNerd]

There's a thread on here (I JUST saw it but can't find it at the moment) about using headlight extension cables that you can find on ebay, plugging them between the headlight wiring and the bulb, and cutting into those for your HLF. When you turn in your lease just unplug the extensions, plug your bulbs back into the factory wiring, and there will be no cut wires.

 

[Chris W]

Purchase yourself some connectors that match the headlight connectors.  You should be able to readily find these.

 

[TritonBoulder47]