SlickTop Solutions
Member
FEVER said:Are these required to be mounted to metal surfaces for heat dissipation?
PJD642 said:Wow. As said above, those would be PERFECT for tailgate mounting, and would have saved me a bunch of time with the dremel notching the grille on my Explorer.
Any chance of a "spot" configuration, or would that require thicker lenses & defeat the purpose?
strobecrazy said:Nice, the low profile should make it easy to use on front fenders for intersections.
SlickTop Solutions said:Wait for the ID6 and ID26 in January, they are bit thicker but take the LEDs on the end and point them outward to the side. This gives you an almost 180 degree coverage from a 6 LED light head.
cbpdogboy said:
FEVER said:interesting.. but probably should have just updated existing thread... http://elightbars.org/forums/f59/axixtech-st6-super-thin-surface-mount-59018/
Zapp, where are you with your signature?
bluestinger90 said:Thanks for the review. Have you had a chance to test it with external flashers? Axixtech ms3/ms6 are not compatible with external flashers.
ch31391 said:That would be my question as well.
WIRED HDH said:I will hook them up to one on monday and see if they will. I am guessing no if the m6 series doesn't...
WIRED HDH said:I will hook them up to one on monday and see if they will. I am guessing no if the m6 series doesn't...
txff914 said:Yellow wire is your pattern wire and your sync wire.
Eric1249 said:I got a pair of these. They have a different name on the box. I set them to steady burn and they would not work with a flasher. Could I be doing something wrong? Here is a couple pics of them mounted.
FEVER said:Which flasher are you using? Make sure you are not using a negative switched flasher......