I need 3 things to put this beacon ray junior back online. I'm looking for the small black gear, a magnifier lens and 3 skirt screws. Let me know what you have. Shipping to NC. Thanks
Skirt screws are available at a decent hardware store being simple oval-head, flat-blade, stainless screws.
I may have a lens but i'd hafta dig deep.
Those fiber gears are truly hen's teeth and as a result, in the past, I have had brass replacements made by a watch-maker in Texas. It wasn't cheap but it was exact and will never wear-out!
Aright. Good to know. The gear on the motor is fine. It's the other one what's bad. Any chance you'd share with me their contact info? I won't resell or anything I just want to get one.
Aright. Good to know. The gear on the motor is fine. It's the other one what's bad. Any chance you'd share with me their contact info? I won't resell or anything I just want to get one.
I'll have to dig pretty deep to locate that contact. That was many moons ago! Give me some time and i'll see what I can come up with! No promises but I'll give it the ol' college try! That figure, if I remember correctly, was in the $80 range...are you prepared to spend that much? I sure wasn't but the unit was useless w/o that gear and it was hand-made... not only that but i had committed to the deal when UI sent the old one down there. I saved the old gear in the event I ever needed another template. i was hoping, maybe to find someone whom might be able to do some 3D printing of another, someday! Same with a recent issue I had w/ a FBII gear that was also obsolete but THAT one I was able to find!