But in both wiring diagramms red goes to Pin 1 and black to Pin 2The wiring diagram appears on PDF pages 7, 8, and 9. The schematic on PDF page 19, however, shows the red and black reversed:
Seems to me only mirror-inverted - I think the wiring diagrams show the termination assignment viewed from the outside (rear) and not from the inside.So this is the pinout of my 2 devices. Hence why I said flipped.
I opened the one up, and I am cleaning it out.. I may need to get a meter on it, but neither of the above wiring pinouts are correct.
Vertical Pin in the upper left I believe is + as it appears to be going to the fuse. Vertical Pin lower left could possibly be ground, but I cannot confirm that yet.
View attachment 251329