Trust me (where have you heard that), for your project you will need 1 male and 1 female.
I will get you some pics tomorrow.
Any of you Aero people - feel free to chime in.
-Pete
I'd like to buzz in but my chime is broken...
Dan I believe Pete is correct.
With Aero Segments there are 2 things to keep in mind. The top and the side of the segment..
The top (where the chrome strip is) is either male or female and they latch together to form 1 complete segment front and back.
The side are the grooves that latch into the next segment next to it or endcap if it happens to be on the end.
so if your looking at the front of a dome starting in the center and moving to the endcap for the driver side dome the male grooves would be on the right, with the female grooves on the left... terminating with the endcap.
The rear would have the male grooves on the left side and the female on the right... also terminating at an endcap
The Passenger side is the exact reverse.. starting in the center front would be male left side and rear would be male right side.
As for the top it would be male top for passenger side front and male top for drivers side rear.. if we are just looking at the front of the bar..
I don't have them with me currently so if I goofed it... my bad