calebsheltonmed23
Member
This is my 2004 Ford Explorer Limited POV, used for EMS/Fire response. This is an ongoing setup and items will be added when funds are available! So far 2 Axixtech XL06 in Blue are installed in the grille, and a Code 3 711 HLF is installed on the high beams. These have been hooked up on a cigarette plug with an inline fuse. 2 VHF 1/4 wave antennas have been added, 1 on the rear roof via magnet mount, and 1 on the left side of the hood using an NMO L mount bracket (hood bracket). The radio has NOT been installed, and I am currently devising some brackets to hold it in the correct position in the console.
Pics of current install:
Glamour Shots :crazy: :
HLF Placement. This is on top of the fuse box under the hood. All connections have since been heat shrunk:
Grille Light Placement. These were attached to the plastic piece on either side behind the grille. I got the idea from another member's install thread:
Antenna placement. 2 1/4 wave VHF antennas, one mounted to hood area via the L bracket, the other being a magnet mount on the rear center roof:
Radio placement. This is where I am currently trying to install the radio. If anyone has any other ideas, feel free to leave feedback!
100W siren speaker placement. Siren speaker to be installed soon:
Video of current install:
Grille Off-
Pics of current install:
Glamour Shots :crazy: :
HLF Placement. This is on top of the fuse box under the hood. All connections have since been heat shrunk:
Grille Light Placement. These were attached to the plastic piece on either side behind the grille. I got the idea from another member's install thread:
Antenna placement. 2 1/4 wave VHF antennas, one mounted to hood area via the L bracket, the other being a magnet mount on the rear center roof:
Radio placement. This is where I am currently trying to install the radio. If anyone has any other ideas, feel free to leave feedback!
100W siren speaker placement. Siren speaker to be installed soon:
Video of current install:
Grille Off-
Last edited by a moderator: