Surgicalcric
Member
I still have a few pieces to add but here is the 90% solution.
Siren: Storm x2
Controller: 4200
Radio(s): Motorola CDM 1550 VHF
Motorola XTS 5000 800Mhz in Vehicle Charger
FRONT WARNING:
Speaker: Whelen sa314 x2 on push bumper
Grill Lights: Feniex DBL T6s
Corner Light: Cannon, Clear
Dash: Apollo 2
SIDE WARNING:
Intersection: T6 each side of push bumper
Sides: Cobra 200 each side
REAR WARNING:
Rear Glass: Cobra 600, Red
Taillights: Cannon, Red
Back-up: Cannon, Clear
In the Works:
Whelen HLF (on order)
T6, Clear – Mounted on mirrors
T6, Amber – License Plate Mount
Everything is mounted under the rear seat on a ¾” piece of OSB. The sirens and 4200 are on the passenger side and the radio and circuit breakers/fuse panel in on the right. Also since taking these pics I have added a shoreline connection to the right of the rear license plate which provides power to a battery charger/inverter, intake heater, and space heater to keep my IV fluids from freezing.
The Bed Slide is 200lb rated 6.5 ft version with the organizer made of ¾” plywood and all weather carpet. Beats the crap out of several thousand dollars for Odyssey auto to do the same thing… There are hand sewn (machine) netting being made from black 9' straps to keep items in their appropriate cubby) The SCBA cradles are for my SCUBA tanks.
In retrospect I really wish I had gone with dummy heads controlled with UFL-44s. It is BS that only 4 lightheads at a time can be syncd without them all going crazy – this is an issue that Feniex needs to work on. Also some of the T6s wont work with older T6s causing them all to work themselves out of sync. Other than that the lights are very bright (the vids don’t do the light output justice).
Siren: Storm x2
Controller: 4200
Radio(s): Motorola CDM 1550 VHF
Motorola XTS 5000 800Mhz in Vehicle Charger
FRONT WARNING:
Speaker: Whelen sa314 x2 on push bumper
Grill Lights: Feniex DBL T6s
Corner Light: Cannon, Clear
Dash: Apollo 2
SIDE WARNING:
Intersection: T6 each side of push bumper
Sides: Cobra 200 each side
REAR WARNING:
Rear Glass: Cobra 600, Red
Taillights: Cannon, Red
Back-up: Cannon, Clear
In the Works:
Whelen HLF (on order)
T6, Clear – Mounted on mirrors
T6, Amber – License Plate Mount
Everything is mounted under the rear seat on a ¾” piece of OSB. The sirens and 4200 are on the passenger side and the radio and circuit breakers/fuse panel in on the right. Also since taking these pics I have added a shoreline connection to the right of the rear license plate which provides power to a battery charger/inverter, intake heater, and space heater to keep my IV fluids from freezing.
The Bed Slide is 200lb rated 6.5 ft version with the organizer made of ¾” plywood and all weather carpet. Beats the crap out of several thousand dollars for Odyssey auto to do the same thing… There are hand sewn (machine) netting being made from black 9' straps to keep items in their appropriate cubby) The SCBA cradles are for my SCUBA tanks.
In retrospect I really wish I had gone with dummy heads controlled with UFL-44s. It is BS that only 4 lightheads at a time can be syncd without them all going crazy – this is an issue that Feniex needs to work on. Also some of the T6s wont work with older T6s causing them all to work themselves out of sync. Other than that the lights are very bright (the vids don’t do the light output justice).
Last edited by a moderator: