I knew someone would ask. So here it goes. I will have a 911EP LS12, Two Feniex Cannon Blue/Blue and Two Cannon Blue/White, two speaker wires. I intend on syncing all of my light heads both in my dash and front. I am using a SoundOff flasher. I also have the Feniex 4200. I intend on replacing the fog lights with the Blue White Cannon and using the White as a drive light... Ok so here is my plan, 4 wires for the cannons that come from the Sound off Flasher, 2 for the speakers, 4 for the 911EP... That's 10 right there. For the Blue Blue cannons, I intend on using the Feniex 4200 Wig Wag flasher as a slow alternate between the Cannon and steady burn of the LS12... This is meant for when I am parked at the scene... Keep it slow right? So I need 2 more wires with that... Now I am at 12. Lastly I need one more wire to actuate a DPDT that will turn off my running lights (halo light I installed) and fog lights when the lights come on and I need 1 wire that I can use to trigger night mode from parking lights... So that adds two more for a total of 14... I intended to add 1 more wire for good measure and I am pulling my 60 amp power wire for the 4200 which is the 8 gauge wire.
So yes it gives me the greatest flexibility and control. I'd rather have this granular control and make changes through software programming of the 4200 then re-wiring...
I am open to feedback, but I am pretty set in my direction.
<speech type="soapbox">
On this whole firewall note... I think the manufactures out there should get on the "wireless" bandwagon...There is this wonderful technology called Bluetooth... just saying.
</speech>