I currently have a simple set up but after some thought and a lot of reading through the forum I believe it's time to redo the front set up and add to the rear of my Avalanche. The current set up is very simple -
Rear: Federal Signal SignalMaster in the rear window run by a Sho-Me 11.1025.008 flasher
Front: Custom visor bar build from a cheap LED strobe kit run by a Sho-Me 11.1005SF flasher
The rear is very functional and easy but obviously the front leaves a lot to be desired. The lights are not used for any emergency response rather this is more of a construction/ side of the road set up. That being said the lights will be focused in the rear. My idea is as follows:
FRONT
Replace the visor light with 2 Amber T-6s in the front grill with an Amber/White Feniex Apollo 2x dash light.
[Broken External Image]:http://pogspalace.com/gallery/data/media/28/truck_front.jpg
REAR
Leave the Federal Signal in the rear window and add amber T-3s - either to the sides as in the picture or to the license plate.
[Broken External Image]:http://pogspalace.com/gallery/data/media/28/truck_rear.jpg
I was toying with the idea of cannons in the reverse lights and the T-3's by the rear plate but beyond that I think it might get to be too much light. Thoughts or other recommendations?
Rear: Federal Signal SignalMaster in the rear window run by a Sho-Me 11.1025.008 flasher
Front: Custom visor bar build from a cheap LED strobe kit run by a Sho-Me 11.1005SF flasher
The rear is very functional and easy but obviously the front leaves a lot to be desired. The lights are not used for any emergency response rather this is more of a construction/ side of the road set up. That being said the lights will be focused in the rear. My idea is as follows:
FRONT
Replace the visor light with 2 Amber T-6s in the front grill with an Amber/White Feniex Apollo 2x dash light.
[Broken External Image]:http://pogspalace.com/gallery/data/media/28/truck_front.jpg
REAR
Leave the Federal Signal in the rear window and add amber T-3s - either to the sides as in the picture or to the license plate.
[Broken External Image]:http://pogspalace.com/gallery/data/media/28/truck_rear.jpg
I was toying with the idea of cannons in the reverse lights and the T-3's by the rear plate but beyond that I think it might get to be too much light. Thoughts or other recommendations?