RickLBZ
Member
I was recently attempting to change the settings on a unit. I extracted the original setting, saved them, opened a file I already used and transferred it. Now when the slide switch is activated it doesn't cancel when turned to the off position, i.e. go from off to 1 then off, it stays on 1. If you go back to 1 then to off, it turns off. This applies to all 3 positions. Being confused I transfered back the original file and this still happened. I then opened a new file, selected the setting of my choice, transferred it and it solved the issue.
Anyone ever experience this or know the reason for the problem?
Anyone ever experience this or know the reason for the problem?
Last edited by a moderator: