Changing my Setup 2007 F150

[TNFF412N]

Right now i have


4 Lin4s in red


2 Tir3s in white in the grill


i want to add


2 Tir3s in red


2 Tir3s in white


right now they are all in a row centered in the grill s you can see from the video

I want to spread them out and have an X pattern going on


So it will be 6 reds and 4 whites in the grill


how should i set them up and were

 

[mike]

double up or triple up on the lightheads so you have 9 optics in the same lighthead and keep the wigwag on each side of the ford badge. i would keep move the lightheads to the upper grille


move the avenger around the rvm and set it to a single slow flash pattern


you can use the lower grille too


here is some ideas

 

[pdk9]

Right now i have
4 Lin4s in red


2 Tir3s in white in the grill


i want to add


2 Tir3s in red


2 Tir3s in white


right now they are all in a row centered in the grill s you can see from the video

I's mount 2 of each lighthead together so there is a larger footprint (in other words, for the x-pattern you have the 2 red lin4's in the top left flashing simultaneously with the 2 white tir3 in the lower right corner ----> the 2 red lin4 in the top right and the 2 white tir3 in the bottom left of the grill will flash ). i'd stack them in pairs so that there is a bigger punch/footprint (i personally don't think the small tir3's in a truck grill don't look that good on their own unless they're stacked or, ideally, they're replaced with something like a pair of tir6's). i would space them out and do something like this:


Red Lin4--------------------------------Red Lin4


Red Lin4--------------------------------Red Lin4


-------------------(Ford Logo)---------------------


White tir3------------------------------White tir3


White tir3------------------------------White tir3


i'd then take the 2 spare tir3 and put them on a 10-75 bracket

 

[JohnMarcson]

I's mount 2 of each lighthead together so there is a larger footprint (in other words, for the x-pattern you have the 2 red lin4's in the top left flashing simultaneously with the 2 white tir3 in the lower right corner ----> the 2 red lin4 in the top right and the 2 white tir3 in the bottom left of the grill will flash ). i'd stack them in pairs so that there is a bigger punch/footprint (i personally don't think the small tir3's in a truck grill don't look that good on their own unless they're stacked or, ideally, they're replaced with something like a pair of tir6's). i would space them out and do something like this:


Red Lin4--------------------------------Red Lin4


Red Lin4--------------------------------Red Lin4


-------------------(Ford Logo)---------------------


White tir3------------------------------White tir3


White tir3------------------------------White tir3


i'd then take the 2 spare tir3 and put them on a 10-75 bracket

That would look good I think. Make a bigger chunk of light flash at the same time.