Wanted: Modern Code 3 LP6000 parts

[Jacob K]

Hello everyone!
I recently got an LP6000 and I'm looking for some parts.
First, I am looking for two red and two blue, and I have 4 amber filters I am willing to trade. Link to listing of the amber filters
Then I am looking for either an OsciLaser or a StingRay with a clear center dome to add to it.
I am also looking for info on the alley lights and how to get a new bulb, as one of them seems to be blown or not working(haven't thoroughly tested it yet).

Thank you!

 

[Jacob K]

Also, I would be interested in an old controller by Code 3 that has at least 5 switches/buttons. Thank you!

 

[RCMoeur]

I don't have a clear center, but I have a pair of LP Stingrays and might have some colored filters.

 

[Jacob K]

Wouldnt mind some filters for the Stingray as well, amber for the back, and maybe some colors up front like red/blue. How much would you do for the Stingrays and the filters if you have any?

 

[Benno]

Then I am looking for either an OsciLaser or a StingRay with a clear center dome to add to it.

Does the bar already have a (colored) dome in the middle and you are just looking for a clear one or do you want to switch from speaker-center to center dome?

 

[Jacob K]

I have a speaker center yes, looking for a clear dome.

 

[Benno]

I have a speaker center yes, looking for a clear dome.

Ok, then you also need the center base and not just a dome.


Without it you couldn't mount the dome.

 

[RCMoeur]

Been busy the last couple days - apologies for the delay.

I do have two StingRays with modules. I tested them recently and they seemed OK.

I have oodles of amber filters so I'm not looking for any more in trade. I do have several red and blue filters that snap fit on rotators & stationary reflectors. For StingRays, you'll need half-cylinder filters, not rotator filters, and I don't have any half-cylinders in blue and only one or two half-cylinders in red. I do have several new amber half-cylinder filters. While you can install a rotator filter on a StingRay, it may cause premature failure due to the added moving mass.

The LP alley or takedown light is a 12 volt MR16 EXT pattern bulb. Commonly available - I have some spares.

I do not have a clear center dome or the required base.

I do have an older Code 3 / PSE 440-L5 3-position slide + 5 rocker switch controller and an older Federal SW300 6-position rocker switch controller.

I'm not sure how much shipping costs are to Canada, so that may affect your buying decisions.

 

[Jacob K]

Been busy the last couple days - apologies for the delay.

I do have two StingRays with modules. I tested them recently and they seemed OK.

I have oodles of amber filters so I'm not looking for any more in trade. I do have several red and blue filters that snap fit on rotators & stationary reflectors. For StingRays, you'll need half-cylinder filters, not rotator filters, and I don't have any half-cylinders in blue and only one or two half-cylinders in red. I do have several new amber half-cylinder filters. While you can install a rotator filter on a StingRay, it may cause premature failure due to the added moving mass.

The LP alley or takedown light is a 12 volt MR16 EXT pattern bulb. Commonly available - I have some spares.

I do not have a clear center dome or the required base.

I do have an older Code 3 / PSE 440-L5 3-position slide + 5 rocker switch controller and an older Federal SW300 6-position rocker switch controller.

I'm not sure how much shipping costs are to Canada, so that may affect your buying decisions.

How much for the Stingrays and the 440 controller?

 

[Jacob K]

bumping this, still looking for filters!