CVPI HEADLIGHT ISSUE

spddare65

Junior Member
Member
May 24, 2010
26
0
64
Garnerville. NY
I recently picked up a used 2005 CVPI. The drivers side high beam does not work. My first thought was that since they took the wig wag flasher out and didnt put the jumper on, that was the issue. I got the appropriate flasher and plugged it in. The flasher works properly, but the high beams still dont work. The bulb is good, but i replaced it anyway just to be sure. Any htoughts?
 
Chances are, there's a cut high-beam circuit between the two headlights. You'd need to find the cut wire and restore it or incorporate it with the flasher as directed. You can unbolt the front grill (not bumper cover) using a 7/16 nutdriver tool and the bottom tabs will just pop out when the nuts are removed so you can access the wiring better.
 
Check by the passenger side headlight harness. Look for the green with black stripe. Most times its cut there if the plug and play was not used. If not try Sean's idea too
 

Forum Statistics

Threads
55,538
Messages
455,828
Members
19,965
Latest member
BlueOrange