Federal signal ford smart siren

medic550

Premium Member
Looking for info on a federal made smart siren for ford crown Vic’s. Has a special ford plug on it and has a ford part number. 5W7J-70443-aa.

Tried calling federal and the guy I spoke with said he had nothing and passed me off to crown America which I can’t also find info.

Does anyone have a wiring diagram for this model? I appear to have a complete one with a small pigtail but don’t want to just start pumping 12 volts on wires.

Thanks
 

Attachments

OP
OP
M

medic550

Premium Member
Well i got some info. Apparently the outputs for the lights on this are negative switch low current. Basically have to use a relay on each output to turn on a circuit.

Hence why there is no heavy positive input on these.
 
Well i got some info. Apparently the outputs for the lights on this are negative switch low current. Basically have to use a relay on each output to turn on a circuit.

Hence why there is no heavy positive input on these.
So you have to hook up a relay between the lights and control box. Do you have a whirring diagram
 
OP
OP
M

medic550

Premium Member
It has to be a relay. I used a Lin3 which it was able to flash but when i switched to a double avenger it went bonkers.

Its a very low current to activate an external relay.
 

Online statistics

Members online
13
Guests online
80
Total visitors
93

Forum statistics

Threads
47,046
Messages
418,813
Members
16,497
Latest member
Amlun95
Top Bottom