Sparky_911
Supporting Donor
http://www.youtube.com/watch?v=y1HdTUFAcsg
This is a Vector bar someone gave me years ago. 2 of the standard rotator pods were bad so I took the hardware out and ordered some stuff from ETD to replace them. The pods on the end are the "smart" pods that can do 18 different things plus alleys and worklight/takedowns. I also used a trick from a Youtuber to clean the lenses with toothpaste, elbow grease and a shop towel to get the scratches and yellowing off the lenses. The 3M restore kit (thanks unnamed store for 18 bucks) worked great on the colored domes but toothpaste and a towel worked better on the clears.. Heres the breakdown
Dash: ETD LED Dual
Grille: ETD Deck 2 Dual
Strobes: Whelen 90w 6head strobe supply with clear tubes in the head/backup lights and blue tubes in the bed cargo lights (which I can still use).
Lightbar: Federal Signal Vector with 2 smart pods set for intersection. Pods 3 and 5 modified with ETD Bumper LEDs facing the rear and an older version of the ETD LED Quad bar cut in half to face forward and out at the sides.
Where im at volunteer can only run blue/clear. All of the LEDs are from Extreme Tactical Dynamics. I know its sacrilege to put Chinese lights in a bar made in the USA....but ive got under 200 dollars in the entire set up. The arrowstick is not wired because "legally" I cant use it. Also the dashlight is off center because of the DRL sensor in the dash board. I also have a WOLO air horn and VIAIR air source kit under the hood which works great with air tools and inflating stuff.
This is a Vector bar someone gave me years ago. 2 of the standard rotator pods were bad so I took the hardware out and ordered some stuff from ETD to replace them. The pods on the end are the "smart" pods that can do 18 different things plus alleys and worklight/takedowns. I also used a trick from a Youtuber to clean the lenses with toothpaste, elbow grease and a shop towel to get the scratches and yellowing off the lenses. The 3M restore kit (thanks unnamed store for 18 bucks) worked great on the colored domes but toothpaste and a towel worked better on the clears.. Heres the breakdown
Dash: ETD LED Dual
Grille: ETD Deck 2 Dual
Strobes: Whelen 90w 6head strobe supply with clear tubes in the head/backup lights and blue tubes in the bed cargo lights (which I can still use).
Lightbar: Federal Signal Vector with 2 smart pods set for intersection. Pods 3 and 5 modified with ETD Bumper LEDs facing the rear and an older version of the ETD LED Quad bar cut in half to face forward and out at the sides.
Where im at volunteer can only run blue/clear. All of the LEDs are from Extreme Tactical Dynamics. I know its sacrilege to put Chinese lights in a bar made in the USA....but ive got under 200 dollars in the entire set up. The arrowstick is not wired because "legally" I cant use it. Also the dashlight is off center because of the DRL sensor in the dash board. I also have a WOLO air horn and VIAIR air source kit under the hood which works great with air tools and inflating stuff.
Last edited by a moderator: