I have lots of 12 volt and strobe light experience but am new to federal signal lights. I got 10 bars for such a steal I couldn't pass them up. But now I'm not sure if I'm missing something or they're not working. I tried one of the Legends LED bars and couldn't get anything to work at all. It had like an 8 gauge red wire, 8 gauge black wire, then 4 sets of twisted wires (8 total, blue and blue/white. Orange and orange/white. Brown and brown/white and I forget the 4th set off my head) the wires are all cut about 5" from the bar and fron what I can tell it seems I may need some type of controller for these?
Next is the vista ricochet the non rotator style, I get the alley lights to work with the orange and the green wires, then got what I believe are the spot lights (two smaller white lights on front) they steady burn or flash side to side. But I can not get any of the upper 8 lights to work or what appears to be the traffic advisory bar on the back to light at all.
Next is the vista ricochet the non rotator style, I get the alley lights to work with the orange and the green wires, then got what I believe are the spot lights (two smaller white lights on front) they steady burn or flash side to side. But I can not get any of the upper 8 lights to work or what appears to be the traffic advisory bar on the back to light at all.