Alright per request I want to give out my specific prices and the flash pattern options you have available when you get your bar programmed by me. Pricing is as follows. For one MPC01 programing it is 35$ which includes USPS priority shipping as well as insurance and delivery confirmation. For two or more units it 40$ and includes whats listed above. I can program the Patriot, Ultra, Freedom, and Liberty SC bars with this software.
B Link Patterns (BL10000 Bars)
Simultaneous
Alternating
In/Out
Crossing
Random
You have three options for the patterns so you could chose alternating, random, and in/out or just choose all random or all crossing, etc. Out of Phase can be selected for all patterns too. You can also have strobe arrow patterns programmed in as well as multiple flash options/rates for your halogen lights/flashers.
All other bar patterns not including full LED bars
Comet 75 with the following sub options
Alternating, Simultaneous, In/Out, Random
Triple 95
Double 120
Rapid Rate 220
Micro Burst II
Micro Busrst III
Action Flash
Modu-Flash
Longburst
Again arrow patters whether strobe or halogen can be programmed in.
Full LED bars (Liberty, Freedom, etc)
Corner LEDs are programmed separate than the inboard LEDs
Corner Modules
Comet Flash 75
Triple Flash 95
Double Flash 120
Rapid Rate 220
Micro Burst II
Micro Burst III
Action Flash
Modu-Flash
Long Burst
Inboard Modules
Comet Flash 75
Double Flash 120
Rapid Rate 300
Rapid Rate 150
Rapid Rate 60
Action Flash
Modu-Flash
Signal Alert 75
Signal Alert 50
Simublast
ZigZag Blast
Random Blast
ZigZag I
ZigZag II
Steady ON
Arrow patters can be programmed as well as flash rates/options for halogen lights.
I can program in all equipment that goes with the MPC01 head, amps, power supplies, etc. I can also program the MPC02 and MPC03 heads. Any questions or further explanations please don't hesitate to send a PM. Thanks!!